Celebrating over 30 years of engineering excellence...
Engineering for the Environment

Elevated Flare System

Inside an elevated flare

Inside an elevated flare

At the top of the elevated system is the flare tip and pilot/ignitor system.  The flare tip is sized according to the flow rate and is manufactured from 304 stainless steel.  The larger diameter is the windshield which helps stabilise the flame.

Located adjacent is the pilot/ignitor tip.  This is made in 304 stainless steel and contains the pilot windshield nozzle and air injector for achieving the correct gas/air mix.  A thermocouple is located inside the pilot to signal the control panel that the pilot is alight.